Table of Contents
Advertisement
5.3
Accessories
The Remote Control Touch is supplied with a power cable with LEMO connector to banana
plug (length: ~ 1,5 m).
The blue PiraT Remote is connected by a 26-pol SUB-D connector to the device and has the
cables for the available interfaces integrated in the cable set.
Additional accessories are available for purchase. The following accessories are compatible:
mounting bracket
various adapter cables
Please contact our sales department for more information about the accessories.
5.4
Installation
The Remote Control Touch and blue PiraT Remote require a connection to the power supply
and one to the client computer.
In order to make full use of all functions of the Remote Control Touch, a connection to at least
one blue PiraT data logger is required. This creates a Telemotive System Link (TSL).
Find more information about client and TSL in the User manual for the Telemotive System
Client.
5.4.1 Cable connection
Note:
Connect the Remote Control Touch and blue PiraT Remote only with devices of Telemo-
tive AG (blue PiraT2, blue PiraT Mini, Remote Control).
Note:
Make sure that the devices are switched off before disconnecting it from power supply.
RCTouch_UserGuide_V3.4.1.doc
Remote Control Touch / blue PiraT Re-
mote
User Guide
Datum:14.12.2018
Seite 19 von 82
Advertisement
Table of Contents
