Changing Application; Actuating Functionkey; Adjusting Backlight; Automatic Adjustment - Magna Telemotive blue PiraT Remote User Manual

7.4

Changing application

To reach another application, you have two options:
1. Press the Home button ...

Active LED lights up briefly.

<Home> view appears.
1. Open the side menu (see section 7.9) ...
and tap on the icon of the desired application.
7.5

Actuating functionkey

Navigate to the tab sheet [Functionkeys] in the application Driver View
Tap on the desired functionkey that was previously assigned with a "complex trigger", see sec-
tion Fehler! Verweisquelle konnte nicht gefunden werden..

The device responds according to the <Action> that was set in the configuration for
the <Event> [Key Stroke] using a functionkey as <Key>.
7.6

Adjusting backlight

Navigate to the tab sheet [General] in the application Settings

7.6.1 Automatic adjustment

If you want the brightness of the screen to adjust automatically, tap on the gray [OFF] button
under <Auto Brightness>.

Brightness is automatically adjusted.

The blue [ON] button is active.

Brightness scale with brightness slider is inactive.

7.6.2 Manual adjustment

If you want to adjust the brightness of the screen manually, tap on the blue [ON] button under
<Auto Brightness>.

The gray [OFF] button is active.

Brightness scale with brightness slider is active.
Swipe the brightness slider to the desired position or
tap on the desired position on the brightness scale.

Brightness is set according to adjustment.

A brief fade-in indicates the new brightness value set in percent.
Figure 7.1: Fade-in after adjusting the brightness
RCTouch_UserGuide_V3.4.1.doc
Remote Control Touch / blue PiraT Re-
mote
User Guide
Datum:14.12.2018
Seite 60 von 82
.
.