In The Network; Telemotive System Client - Magna Telemotive blue PiraT Remote User Manual

5.4.1.3

In the network

The Remote Control Touch / blue PiraT Remote has two Ethernet ports. The loggers to be
controlled are connected directly via Ethernet. These loggers must establish a TSL network with
the Remote Control Touch / blue PiraT Remote in order to be recognized. The client computer
can be connected to a free Ethernet port of the TSL chain.
Figure 5.6: TSL network with one bPMini, one RCT and one bP2 (e.g.)

5.4.2 Telemotive System Client

Note: When delivered, the Remote Control Touch / blue PiraT Remote is configured as
Automatic DHCP configuration for TSL with IP 192.168.0.233.
Open your internet browser.
Enter the IP address of the Remote Control Touch / blue PiraT Remote in the address bar. (IP
factory setting: 192.168.0.233)
Press the [Enter] key.

The computer connects to the device.

The TSL Client Portal opens.
RCTouch_UserGuide_V3.4.1.doc
Remote Control Touch / blue PiraT Re-
mote
User Guide
Datum:14.12.2018
Seite 21 von 82