Table of Contents
Advertisement
7.7
Adjusting volume
Note:
A tone is produced to simulate the newly set volume. If you set the volume to "Volume:
0%", the Remote Control Touch is mute. Its acoustic signals are switched off.
Navigate to the tab sheet [General] in the application Settings
Swipe the volume slider to the desired position or
tap on the desired position on the volume scale.
A change in volume is indicated by a tone and at the same time it simulates the new-
ly set volume.
A brief fade-in indicates the new volume value set in percent.
Figure 7.2: Fade-in after adjusting the volume
7.8
Changing tab sheet
To reach other tab sheets within an application, tap in the tab bar on the tab of the desired tab
sheet.
Selected tab sheet appears.
To reach tab sheets in other applications, switch to the application of the desired tab sheet first
(see section 7.4) and continue to proceed as just described.
7.9
Opening and closing side menu
Figure 7.3: Example side menu
RCTouch_UserGuide_V3.4.1.doc
Remote Control Touch / blue PiraT Re-
mote
User Guide
To open the side menu, you have two options:
1. Tap on the
2. Swipe from the left edge of the screen to the right.
To close the side menu, you have three options:
1. Tap in the window of the tab sheet.
2. Tap on the
3. Swipe from the right to the left edge of the screen.
.
button.
button.
Datum:14.12.2018
Seite 61 von 82
Advertisement
Table of Contents
