Power Supply For Remote Control Touch; Power Supply Including Cable Set For Blue Pirat Remote - Magna Telemotive blue PiraT Remote User Manual

5.4.1.1

Power supply for Remote Control Touch

The power connection of the Remote Control Touch is similar to that of the Remote Con-
trol Voice. They are NOT identical. We therefore recommend to use the device-specific
cable.
A power cable with LEMO connector to banana plug is required for the connection of the Re-
mote Control Touch to the power supply.
Figure 5.4: Power cable with LEMO connector to banana plug
Plug the LEMO connector into the Remote Control Touch and the banana plug into the power
supply (red/Vbat /+/Clamp 30
5.4.1.2

Power supply including cable set for blue PiraT Remote

A cable set with 26-pol SUB-D connector to banana plug is required for the connection of the
blue PiraT Remote to the power supply.
Figure 5.5: Power cable with 26-pol SUB-D connector to banana plug
Plug the 26-pol SUB-D connector into the blue PiraT Remote and the banana plug into the
power supply (red/Vbat /+/Clamp 30
RCTouch_UserGuide_V3.4.1.doc
Remote Control Touch / blue PiraT Re-
mote
User Guide
and black/GND/-/Clamp 31).
and black/GND/-/Clamp 31).
Datum:14.12.2018
Seite 20 von 82