Remote Control Touch / Blue Pirat Remote - Hardware; Position Of Connectors And Operating Elements; Top View - Magna Telemotive blue PiraT Remote User Manual

Remote Control Touch / blue PiraT Remote – hardware
5
This chapter describes the hardware of the Remote Control Touch and blue PiraT Remote.
The position and function of all interfaces, the accessories and the installation of hard- and
software are explained.
The Remote Control Touch is the remote control and external display device for the blue PiraT
Mini and blue PiraT2 data loggers or a TSL network.
The Remote Control Touch allows you to:

display bus load, status and memory of available interfaces,

display date and time,

trigger functionkeys,

display set markers,

adjust backlight and volume,

set triggers,

record and play voice notes.
The blue PiraT Remote has additional some interfaces and internal storage for logging data
and can therefore be used as stand alone device.
5.1

Position of connectors and operating elements

5.1.1 Top view

Speaker
Brightness sensor
Home button
Active LED
State LED
Figure 5.1: Top view with operating elements
RCTouch_UserGuide_V3.4.1.doc
Remote Control Touch / blue PiraT Re-
mote
User Guide
Microphone
Datum:14.12.2018
Seite 12 von 82
Touchscreen
Index