Table of Contents
Advertisement
6.2.6 The application [Camera Viewer] |
Live view of an connected camera
The application Camera Viewer shows a liveview from all available
cameras in the TSL cluster.
From firmware release 3.2.1, the live images of connected cameras can be shown on the dis-
play too.
This feature is implemented for:
Mounting and adjusting the camera in a vehicle
Showing the video data permanently is in theory possible but not recommended cause this will
generate too much traffic between the devices and can disturb the TLS network.
To see the pictures from the cameras open the [Camera Viewer] application from the [Home]
screen and the configured cameras are displayed there in a list.
Note: This overview shows all configured cameras, independent if the camera is just
connected or not.
Figure 6.31: Camera Viewer: Camera overview
RCTouch_UserGuide_V3.4.1.doc
Remote Control Touch / blue PiraT Re-
mote
User Guide
Datum:14.12.2018
Seite 47 von 82
Advertisement
Table of Contents
