Table of Contents
Advertisement
5.2
Functionality of connectors and operating elements
The functionality of connectors and operating elements is impaired by certain conditions such
as moisture, darkness, heat or cold, mechanical action, dirt or similar.
Observe therefore the points described in chapter 8 Maintenance provisions, safety regulations.
5.2.1 Ports
The ports are used to connecting the devices, for example with the power supply.
Port
No. Designation
1
8-pol LEMO socket
(RCTouch only)
2
26 pol SUB-D
(bP Remote only)
3
2x Gbit Ethernet (RJ45)
4
SD card slot
(bP Remote only)
5
Micro-USB 2.0
6
4-pol audio jack plug
stereo out/microphone
(3.5 mm) OMTP
(CTIA does NOT work!)
Table 5.1: Available connections
5.2.2 Brightness sensor
The brightness sensor helps adjust the screen's backlight depending on the ambient light. It
serves only the automatic regulation and is permanently active, for switching the display if nec-
essary.
5.2.2.1
Night mode
If the environment is too dark, the devices automatically switches into night mode. In this view,
the surface is displayed in modified colors, so that the driver is not blinded. The night mode will
be activated if you drive into a tunnel for example.
5.2.3 Home button
The Home button is used to:
switching the device on or off,
switching to the [Home] screen
RCTouch_UserGuide_V3.4.1.doc
Remote Control Touch / blue PiraT Re-
mote
User Guide
Cable
Power cable with LEMO connector to
banana plug
Gbit Ethernet cable
Micro-USB connecting cable
3.5" jack/audio cable
Datum:14.12.2018
Seite 14 von 82
Connection with ...
Power source
Power source
interfaces
Client computer or
data logger
Logging data
USB devices
Microphone, speak-
er, headset, etc.
Advertisement
Table of Contents
