Stratasys J850 Manual page 39

10. Click to begin the material replacement process in the printer.
The Cartridge Positioning screen appears, showing you the new location
of all cartridges in the material cabinet.
The correct cartridge is in this slot.
No cartridge (or the incorrect cartridge) is in this slot.
The cartridge in this slot has insufficient weight to complete the material
replacement process.
The expiration date of the cartridge in this slot has passed.
11. Replace material cartridges as necessary, according to the instructions in
the wizard screen.
12. Click .
13. Read the warning message, and click
14. In the final wizard screen, click
The printer-control application is automatically updated, and it restarts.
When it opens, the interface displays the new material(s). The interface in
.
.