Stratasys J850 Manual page 116

Test Selection Area
In the Test Selection area, at the bottom of the screen, you can quickly select
or de-select tests by their characteristics:
➢ Click .
➢ Use the Save and View command buttons.
Click the command buttons, on the right side of the screen to perform the
following operations:
Run
Click to run the selected tests.
Reset
Click to clear previously run tests. This returns the status of each test to
Unknown (?).
Save
Click to save a report that summarizes the tests run. The report is saved as an
HTML file. You can save any number of reports for the tests you run; the
name of the file saved is
saved in the printer installation folder, but you can save it in any other folder.
View
Click to display the latest test report that you saved. (You can view other test
reports by opening the relevant files in your Web browser. To do so, open
Windows Explorer, and double click the BITReport file.)
. By default, these files are