Stratasys J850 Manual page 30

printing, the printer interface indicates this (see "Printer Interface Color Key"
below).
The background colors in the printer indicator fields tell you at a glance
whether or not the value or item is suitable or ready for printing.
• Green—suitable/ready for printing
For example, in Figure 4-4 on the previous page:
❒ Heads (°C)—The heads have reached the temperature required for
printing models.
❒ Ambient—The ambient temperature of the printing chamber is within
the acceptable range.
❒ Heads Liquid—The level of Model and Support material in the
print-block reservoir is OK.
❒ Heads Vacuum—The vacuum level in the system is within the
acceptable range.
❒ Pre-Heater—The Model and Support resins need to be heated before
being supplied to the print block. The temperature has reached the
acceptable range.
• Red—not suitable for printing (or indicates a warning)
For example, in Figure 4-4 on the previous page:
❒ Waste—The weight of the waste container is 9000 grams, more than
allowed when beginning a print job. (See "Replacing the Waste
Container" on page 4-97.)
• Blue—not ready
For example, in Figure 4-4 on the previous page:
❒ UV lamps—The UV lamps are not on.
The color of the material cartridges displayed in the printer interface indicates
which cartridges are active for the current (or next) print job.
For example, in Figure 4-3 on page 4-4:
• Blue—active cartridge
• Gray—reserve cartridge