4. In the job-preparation application, make sure that the correct slice
number is entered in the dialog box.
5. If, for any reason, the correct number does not appear in the dialog box,
enter the number and click
You cannot continue printing the model if:
• The number of the last slice printed does not appear in the printer
interface, even if the server computer displays the confirmation dialog box.
• There was a relatively long interruption in printing, even if the "last slice"
and indicators are correct. The part of the model already printed may
deform or shrink, and there might be a visible difference between it and
the newly printed part. The effects of a printing stoppage on a model
depend on the model size and structure, Model material used, ambient
temperature and the length of the stoppage.
.