Human Body Detection - HIKVISION DS-7216HGHI-K1 User Manual

3. Select a camera.
4. Check Enable Region Exiting Detection.
5. Optional: Check Save VCA Picture to save the captured region exiting detection pictures.
6. Follow these steps to set the detection rules and detection areas.
1) Select Arming Region. Up to 4 regions are selectable.
2) Set Sensitivity. The higher the value is, the more easily the detection alarm will be triggered.
Its range is [0-100].
3) Click Draw Region and draw a quadrilateral in the preview window.
7. Set the arming schedule. Refer to Configure Arming Schedule.
8. Set linkage actions. Refer to Configure Linkage Actions.
9. Click Apply.

5.6 Human Body Detection

Go to Smart Analysis → Smart Analysis → Engine Configuration. Configure at least one engine
usage as Picture Recognition-Human Body. Refer to Engine Configuration for details.
Go to Smart Analysis → Smart Analysis → Task Configuration to enable the task for camera. For
details, refer to Task Configurationfor details.
Note
The chapter is only available for certain models of iDS series.
5.6.1 Human Body Detection
The human body detection enables to detect the human body appearing in the monitoring scene,
Digital Video Recorder User Manual
Figure 5-9 Region Exiting Detection
64