2. Click
of an available HDD to set it as the hot spare disk.
Automatically Rebuild an Array
The video recorder can automatically rebuild degraded arrays with the hot spare disks.
Before You Start
Create hot spare disks. For details, refer to Configure a Hot Spare Disk.
Steps
1. Go to Storage → RAID Setup → Array.
Manually Rebuild an Array
If no hot spare disks are configured, rebuild a degraded array manually.
Before You Start
At least one available physical disk must exist to rebuild an array.
Steps
1. Go to Storage → RAID Setup → Array.
2. Click
of the degraded array.
Digital Video Recorder User Manual
Figure 9-9 Array List
99