Facial Detection - HIKVISION DS-7216HGHI-K1 User Manual

Digital Video Recorder User Manual
Note
The chapter is only available for certain models of iDS series.

5.4.1 Facial Detection

The facial detection detects the face appearing in the surveillance scene. Linkage actions can be
triggered when a human face is detected.
Steps
1. Go to System → Event → Smart Event.
2. Click Face Detection.
Figure 5-2 Facial Detection
3. Select a camera to configure.
4. Check Enable Face Detection.
5. Optional: Check Save VCA Picture to save the captured pictures of face detection.
6. Set the detection sensitivity. Sensitivity range: [1-5]. The higher the value is, the more easily the
face will be detected.
7. Set the arming schedule. Refer to Configure Arming Schedule
8. Set linkage actions. Refer to Configure Linkage Actions
9. Click Apply.
54