Summary of Contents for HIKVISION IDS-7204HUHI-M1/S-2TB
Page 1
Digital Video Recorder Quick Start Guide...
Page 2
BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS.
Page 3
Digital Video Recorder Quick Start Guide Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
Page 4
Digital Video Recorder Quick Start Guide Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Provides additional information to emphasize or supplement important points of the main text. Indicates a potentially hazardous situation, which if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results.
Page 5
Digital Video Recorder Quick Start Guide Power Supply Instructions Use only power supplies listed below. For DS-7104HQHI-K1, DS-7108HQHI-K1, and DS-7104HUHI-K1. Standard Power Supply Models Manufacturer MSA-C1500IC12.0-18P-GB MOSO Technology Co., Ltd. British ADS-26FSG-12 12018EPB Shenzhen Honor Electronic Co., Ltd. MSA-C1500IC12.0-18P-DE MOSO Technology Co., Ltd.
Digital Video Recorder Quick Start Guide Chapter 1 Rear Panel Interfaces Description The rear panel interfaces vary with different models. Refer to Table 1-1 for the common interfaces description of rear panels. Table 1-1 Common Interfaces Description of Rear Panels Item Description Item...
Digital Video Recorder Quick Start Guide 2.2 HDD Installation Before you start Before installing a hard disk drive (HDD), please make sure the power is disconnected from the device. A factory recommended HDD should be used for the installation. Tools Required: Cross screwdriver. 2.2.1 Bracket Installation Bracket installation is applicable when you need to remove the cover of the device and install the HDD to the internal bracket.
Digital Video Recorder Quick Start Guide 2.2.3 Fix-on-Bottom Installation Fix-on-bottom installation is applicable when you need to install and fix the HDD on the device bottom. Step 1 Remove the cover from device 2) Connect the other end of data Step 3 Set the device up, by unfastening the screws on cable to HDD.
Digital Video Recorder Quick Start Guide Chapter 3 Menu Operation 3.1 Startup Proper startup is crucial to expanding the life of the DVR. Step 1 Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an Uninterruptible Power Supply (UPS) be used in conjunction with the device.
Digital Video Recorder Quick Start Guide 3.3 Use the Unlock Pattern for Login Purpose For the Admin user, you can configure the unlock pattern for device login. After the device is activated, you can configure the device unlock pattern. Step 1 Use the mouse to draw a pattern among the 9 dots on the screen.
Page 11
Digital Video Recorder Quick Start Guide 3.5 User Logout, Shutdown and Reboot Purpose You can log out of the system, shut down, or reboot the device. Step 1 Click on the menu bar. Step 2 Click Logout, Shutdown, or Reboot. After you have logged out of the system, menu operation on the screen is invalid.
Digital Video Recorder Quick Start Guide 3.7 Add IP Cameras Purpose Add the network cameras to the connection list of the device before getting live video or recording videos. Before you start Ensure the network connection is valid and correct, and the IP camera to add has already been activated. Please refer to the User Manual for activating the inactive IP camera.
The maximum connectable AT/AF camera number varies with different models. Please turn off the PoC function if the camera does not support PoC, or the camera is not produced by Hikvision. Otherwise, it may result in permanent damage to the camera or DVR. 3.9 Network Settings 3.9.1 Configure General Settings...
Digital Video Recorder Quick Start Guide 3) Check The Hik-Connect service will require internet access. Please read Service Terms and Privacy Statement before enabling the service if you agree the service terms and privacy statement. 4) Click OK to save the settings. ...
Page 15
Digital Video Recorder Quick Start Guide Step 1 Enter the playback mode ( Step 2 Check the channel(s) in the list. Step 3 Double-click to select a date on the calendar. Step 4 You can use the toolbar in the bottom part of Playback interface to control playing progress.
Digital Video Recorder Quick Start Guide Chapter 4 Accessing by Web Browser You shall acknowledge that the use of the product with Internet access might be under network security risks. For avoidance of any network attacks and information leakage, please strengthen your own protection. If the product does not work properly, please contact with your dealer or the nearest service center.
Need help?
Do you have a question about the IDS-7204HUHI-M1/S-2TB and is the answer not in the manual?
Questions and answers