Important Notes & Recommended Tools - BodyCraft HFT PRO Owner's Manual

I
MPORTANT
1. Before assembly, read all instructions thoroughly and preview diagrams to help make the
installation easier.
2. Make sure all parts are accounted for and in proper condition before beginning assembly.
See the parts list.
3. Be cautious not to damage the flooring when assembling. Place a protectant down such as
a rubber mat or shipping blanket.
4. Let plastics and weight stacks acclimate to room temperature before you begin assembly.
5. Two people are required for the safe assembly of this equipment.
6. Insert all bolts in the same direction when possible. Do not tighten until instructed.
7. Carefully install plastic caps using a rubber mallet.
8. When measuring bolt lengths, only measure the shank.
9. When the installation is complete, be sure
perform preventative maintenance.
Recommended Tools, Conditions & Items for Assembly:
RATCHET
COMBINATION
WRENCHES
SOCKETS
9/16"
9/16"
3/4"
3/4"
LOW
MINIMUM 65 DEGREES
& LOW HUMIDITY
N R
OTES &
Important Notes and Tips:
0 1"
1/2 1/2
1/4 3/4 1/4 3/4
ALLEN
ADJUSTABLE
WRENCHES
5/32
3/16
3/8
WINDOW &
CLEAN COTTON
SIMPLE GREEN
CLOTH CLEANERS
T
ECOMMENDED
to regularly check for rust or damage, and
i.e. 3" Hex Bolt
2" 3"
1/2
1/4 3/4 1/4
TORQUE WRENCH
WRENCH
MIN. 8"
100% PURE
SILICONE LUBE
6
OOLS
RUBBER
MALLET
RUBBING
ALCOHOL