Coordinate Measurement; Entering Instrument Station Data - Topcon DS Series Instruction Manual

16.COORDINATE MEASUREMENT

By performing coordinate measurements it is possible to find the 3-dimensional coordinates of the
target based on station point coordinates, instrument height, target height, and azimuth angles of the
backsight station which are entered in advance.
• It is possible to allocate softkeys in measurement menus to suit various applications and the ways
that different operators handle the instrument.

"22.6 Allocating Key Functions"
16.1

Entering Instrument Station Data

Before performing coordinate measurement, enter instrument station coordinates and instrument
height.

• "Occupy" on the software represents instrument station.
PROCEDURE
1. First measure the instrument height with a tape
measure, etc.
2. Select "Coord." in <Menu>.
88