Allocating User-Defined Tabs - Topcon DS Series Instruction Manual

22.4

Allocating User-defined Tabs

It is possible to allocate tabs in Observation mode and Menu mode to suit the measurement
conditions. It is possible to operate the instrument efficiently because unique tab allocations can be
preset to suit various applications and the ways that different operators handle the instrument.
• The current tab allocations are retained until they are revised again, even when the power is cut off.
• Press [CLEAR] in <Customize/Select screen> to return all customized configurations including
screen controls, status bar settings, and softkey allocations to their previous settings.
• One screen can contain a maximum of 5 tabs.

• When tab allocations are recorded and registered, the previously recorded tab settings are cleared.
Tab allocations

The following are tabs allocated when the instrument was shipped and tabs that can be defined
by the user.
• "Basic observation"
Factory settings
Camera
SHV
SHVdist
Graphic
• Setting out
Factory settings
Obs.
Graphic
• Setting out Coord.
Factory settings
SHV
NEZ
Graph1
Graph2

• Camera tab and Graphic tab cannot be deleted.
User-definable tabs
SHV
SHVdist
SHV + Coord.
User-definable tabs
Obs.
User-definable tabs
SHV
NEZ
139
22. CHANGING THE SETTINGS