Starkey Mode - Topcon DS Series Instruction Manual

5.4

Starkey Mode

Via Starkey mode, you can jump from each basic mode screen to the screen of checking/changing the
various settings directly. Press starkey {
pressed and hold in the same way with status bar.
• 12 icons allocated in Starkey mode and the above 8 icons correspond with that status bar
• Allocation of the icons can be changed.

Changing allocation of Starkey mode: "22.7 Changing Starkey Mode Icons"
Indicates the current status of the instrument.
Tapping icons will switch between the relevant options for that item. Tapping and holding will display
a list of all available options for that item and, in certain cases, a link to the configuration screen for
that item. (The numbers correspond to above icons).
(1) Battery icon
Remaining battery power indicator (BDC70/external battery BT-73QA, Temperature = 20°C, EDM
on).
The remaining battery power displayed when distance measurement is in progress may differ to
that displayed at other times.
: Level 3
: Level 2
: Level 1
: Level 0
: No power
★
} to enter Starkey mode. Each icon can be tapped or
Full power
Plenty of power remains
Half or less power remains
Little power remains Prepare a replacement battery.
(Flashes red and black)
Stop operation and charge the battery.
(Red display in the center of the screen)

"6.1 Battery Charging"
(1) (2) (3) (4)
(5) (6) (7) (8)
(9) (10)
(11) (12)
11 and 12 are not allocated
when instrument was shipped.
28
5. BASIC OPERATION