Frequency/Voltage Control - PCchips M921 Series User Manual

Frequency/Voltage Control

This item enables you to set the clock speed and system bus for
your system. The clock speed and system bus are determined by
the kind of processor you have installed in your system.
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
Frequency/Voltage Control
Auto Detect DIMM/PCI Clk
Spread Spectrum
CPU Host/3V66/PCI Clock
CPU Ratio
    : Move
Enter : Select
F1:General Help F59:Previous Values
Auto Detect When this item is enabled, BIOS will disable the
DIMM/PCI Clk clock signal of free DIMM and PCI slots.
Spread If you enable spread spectrum, it can
Spectrum significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.
CPU Use the CPU Host Clock to set the frontside bus
Host/3V66/PCI frequency for the installed processor (usually
Clock 133 MHz, 100 MHz or 66 MHz).
CPU Ratio Use this item to select a multiplier for the system
frontside bus (FSB) frequency.
3: BIOS Setup Utility
[Enabled]
Item Help
[Enabled]
[Default]
Menu Level
[X 8]
+/-/PU/PD:Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults F7:Optimized Defaults
41