PCchips M921 Series User Manual page 31

CPU L1&L2 All processors that can be installed in this
Cache mainboard use internal level 1 (L1) cache
and level 2 (L2) cache memory to improve
performance. Leave this item at the default
value for better performance.
CPU L2 Cache This item enables or disables ECC (Error
ECC Checking Correction Code) error checking on the
CPU cache memory. We recommend that
you leave this item at the default value.
Quick Power On Enable this item to shorten the power on
Self Test testing (POST) and have your system start
up faster. You might like to enable this item
after you are confident that your system
hardware is operating smoothly.
1 st Boot Device These items determine the device order for
2 nd Boot Device the computer's application of looking for an
rd
3 Boot Device operating system to load at start-up time.
Boot Other If you enable this item, the system will
Device search for other booting devices if it fails to
find one in those devices specified under the
First, Second, and Third boot devices.
Swap Floppy If you have two floppy diskette drives in
Drive your system, this item allows you to swap
the assigned drive letters so that drive A
becomes drive B, and drive B becomes
drive A.
Boot Up Floppy If this item is enabled, it checks the size of
Seek the floppy disk drives at start-up time. You
don't need to enable this item unless you
have a legacy diskette drive with 360K
capacity.
BootUp Num- This item defines if the keyboard Num Lock
Lock Status key is active when your system is started.
Typematic Rate If this item is enabled, you can use the
Setting following two items to set the typematic rate
and the typematic delay settings for your
keyboard.
3: BIOS Setup Utility
27