Frequency/Voltage Control; Load Fail-Safe Defaults - PCchips M811LU Manual

Frequency/Voltage Control

This item enables you to set the clock speed and system bus for
your system. The clock speed and system bus are determined by
the kind of processor you have installed in your system.
Phoenix – AwardBIOS CMOS Setup Utility
Auto Detect DIMM/PCI Clk
Spread Spectrum Modulated
CPU Clock
↑ ↓ → ← : Move
Enter : Select
F5:Previous Values
Auto Detect DIMM/PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of
free DIMM and PCI slots.
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the EMI
(Electro-Magnetic Interference) generated by the system.
CPU Host Clock (Default)
This item is used for overclocking only.

Load Fail-Safe Defaults

This option opens a dialog box that lets you install fail-safe
defaults for all appropriate items in the Setup Utility:
Press <Y> and then <Enter> to install the defaults. Press <N> and
then <Enter> to not install the defaults. The fail-safe defaults place
no great demands on the system and are generally stable. If your
system is not functioning correctly, try installing the fail-safe
defaults as a first step in getting your system working properly
Frequency Control
[Enabled]
[Enabled]
[Default]
+/-/PU/PD:Value: F10: Save ESC: Exit
F6:Fail-Safe Defaults F7:Optimized Defaults
40
Item Help
Menu Level
F1:General Help