Table of Contents
Advertisement
Mainboard User's Manual
Standard CMOS Features Page
This option displays a table of items defining basic information
about your system.
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
Date (mm:dd:yy)
Time (hh:mm:ss)
IDE Primary Master
IDE Primary Slave
IDE Secondary Master
IDE Secondary Slave
Drive A
Drive B
Floppy 3 Mode Support
Video
Halt On
Base Memory
Extended Memory
Total Memory
: Move
Enter : Select
F1:General Help
F7:Optimized Defaults
Date & Time
Use these items to set up system date and
time
IDE Pri Master
Use these items to configure devices
Pri Slave
connected to the Primary and Secondary IDE
Sec Master
channels. To configure an IDE hard disk
Sec Slave
drive, choose Auto. If the Auto setting fails to
find a hard disk drive, set it to User, and then
fill in the hard disk characteristics (Size,
Cyls, etc.) manually. If you have a CD-ROM
drive, select the setting CDROM. If you have
an ATAPI device with removable media (e.g.
a ZIP drive or an LS-120), select Floptical.
Floppy Drive A
Use these items to set up size and capacity of
Floppy Drive B
the floppy diskette drive(s) installed in the
system.
24
Standard CMOS Features
Tue, July 11 2000
12 : 8 : 59
[1.44M, 3.5 in.]
[None]
[Disabled]
[EGA/VGA]
[All Errors]
640K
31744K
32768K
+/-/PU/PD:Value:
F10: Save
F59:Previous Values F6:Fail-Safe Defaults
Item Help
Menu Level
Change the day, month,
year and century.
ESC: Exit
Advertisement
Table of Contents
