Set Supervisor And User Password Option - PCchips M921 Series User Manual

Set Supervisor and User Password Option

These items can be used to install a password. A Supervisor
password takes precedence over a User password, and the
Supervisor can limit the activities of a User. To install a password,
follow these steps:
1. Highlight the item Set Supervisor/User Password
on the main menu and press <Enter>.
2. The password dialog box appears.
3. If you are installing a new password, type in the
password. You cannot use more than eight
characters or numbers. The Set Supervisor/User
Password item differentiates between upper and
lower case characters. Press <Enter> after you have
typed in the password. If you are deleting a
password that is already installed, press <Enter>
when the password dialog box appears. You see a
message that indicates that the password has been
disabled.
4. Press any key. You are prompted to confirm the
password.
Type the password again and press <Enter>, or
5.
press <Enter> if you are deleting a password that is
already installed.
6. If you typed the password correctly, the password
will be installed.
3: BIOS Setup Utility
43