Standard Cmos Setup Page - PCchips M957G Manual

Standard CMOS Setup Page

This page displays a table of items defining basic information
about your system.
CMOS SETUP UTILITY – Copyright (C) 1985-2004, American Megatrends, Inc.
System Time
System Date
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Floppy A
Floppy B
: Move
F1: General Help
Date & Time
These items set up system date and time.
Primary IDE Master/Primary IDE Slave/Secondary IDE
Master/Secondary IDE Slave
These items configure devices connected to the Primary and
Secondary IDE channels. To configure an IDE hard disk drive,
choose Auto. If the Auto setting fails to find a hard disk drive, set
it to User, and then fill in the hard disk characteristics (Size, Cyls,
etc.) manually. If you have a CD-ROM drive, select the setting
CDROM. If you have an ATAPI device with removable media
(e.g. a ZIP drive or an LS-120), select Floptical.
Floppy A/Floppy B
These items set up size and capacity of the floppy diskette
drive(s) installed in the system.
Chapter 3: BIOS Setup Utility
Standard CMOS Setup
00:01:25
Thu 05/06/2004
User [Enter], [TAB] or
Not Detected
[SHIFT-TAB] to select a
Not Detected
field.
Not Detected
Use [+] or [-] to configure
Not Detected
system time.
1.44 MB 3 1/2"
Disabled
Enter: Select +/-/: Value F10: Save Esc: Exit
F9: Optimized Defaults
27
Help Item