Connecting The Workstation To The Mains Voltage - Fujitsu Siemens CELSIUS 4 Series Operating Manual

Preparation for use and operation

Connecting the workstation to the mains voltage

If your workstation does not have a voltage adjuster on the power supply, it will automatically adjust
for the correct rated voltage.
If the power supply on your workstation displays a manual voltage adjuster, ensure that the
displayed rated voltage correctly matches the local rated voltage.
1 = Notch for inserting the screwdriver
Ê
Check the voltage setting.
The value indicated with an arrow must be compatible with the local rated voltage:
!
115 = 100 V to 127 V
If the voltage setting is incorrect, then lift out the manual voltage adjuster with a
screwdriver (1), turn it to the required setting and reinsert it.
12 - English
Connecting the workstation to the mains voltage
100 V - 127 V
1
100 V - 127 V
230 = 200 V to 240 V
200 V - 240 V
1
200 V - 240 V
1
A26361-K547-Z400-1-7419
1