Connecting The Device To The Mains Voltage; Connecting The Power Adapter - Fujitsu ESPRIMO Q900 Operating Manual

Connecting the device to the mains voltage

Connecting the power adapter

► Connect the mains adapter cable to the DC jack (DC IN) of the device (1).
► Connect the power cable to the mains adapter (2).
► Connect the power cable to a mains outlet (3).
Fujitsu Technology Solutions
The supplied power cable conforms to the requirements of the country in
which you purchased your device. Make sure that the power cable is
approved for use in the country in which you intend to use it.
The mains adapter's power cable should only be connected to a mains socket
if the device is connected to the mains adapter.
Do not use the mains adapter for other devices.
Only use the mains adapter intended for your device, see chapter "Technical
data".
Make sure that the rated current of the mains adapter is not higher than that of
the power system to which you connect it (see technical data for the mains
adapter).
1
2
Preparation for use
3
11