Fujitsu Siemens CELSIUS 4 Series Operating Manual page 48

System expansions
Ê
Take the new drive out of its packaging.
Ê
Make the required changes to the drive settings (if necessary, to the settings of installed drives
as well).
Ê
Slide the drive into the workstation (1).
Ê
Plug the connectors of the data cable and the power supply cable into the drive (2).
Ê
Fasten the drive with the screws (3).
Ê
Close the system unit (see "Closing the Workstation").
i
It may be necessary to modify the entry for the drive in the BIOS Setup.
40 - English
2
Installing and removing accessible drives
3
1
A26361-K547-Z400-1-7419