Connecting The Monitor To The Electricity Supply - Fujitsu Siemens CELSIUS 4 Series Operating Manual

Connecting devices

Connecting the monitor to the electricity supply

Ê
Follow the instructions contained in the monitor manual to prepare the monitor for operation.
Ê
Plug the data cable of the monitor into the monitor port of the workstation.
Ê
Depending on the connector, plug the monitor power cable into either the workstation (1) or the
grounded mains outlet (2).
You may only plug the monitor power cable into the monitor connector of the workstation
!
if the rated current of the monitor is less than 1.5 A (230 V) or 3 A (115 V). The rated
current for the monitor is given on the monitor itself and in the Operating Manual for the
monitor.
A26361-K547-Z400-1-7419
Preparation for use and operation
1
1
2
English - 11