Table of Contents
Advertisement
Preparation for use and operation
Important keys and key combinations
The following description of keys and key combinations refers to MS Windows. Details of other keys
and key combinations can be found in the documentation of the relevant application programme.
ON/OFF switch
Depending on the setting in the BIOS setup, the system can be switched on or off
with this switch. With Windows 98 with ACPI, Windows 2000 or with Windows XP
you can set additional functions of the power button in the Control Panel.
On some keyboards the power button can only be used with ACPI. Otherwise the
key is inoperative.
Enter key
confirms or starts the marked selection. The enter key is also referred to as the
"Return" key.
Start key
calls up the Windows Start menu.
Menu key
invokes the menu for the marked item (Windows).
Shift key
enables upper-case letters and the upper key symbols to be used.
Alt Gr (e.g. German keyboard)
Alt Gr
produces a character shown on the right-hand side of a key (e.g. the character "\"
on the key [ß]).
Euro key
E
outputs the Euro symbol when pressed simultaneously with the [Alt Gr] key.
Num Lock key
Num
by pressing the Num Lock key you switch between the Numeric keypad cursor
Lock
control functions and digit or comma functions.
When the Num Lock indicator is lit the digit and comma keys are active.
When the Num Lock indicator is not lit the cursor control functions are active in the
Numeric keypad.
Ctrl key
Ctrl
starts key combination actions.
Ctrl
Alt
20 - English
Warm boot
restarts the workstation. First hold down the [Ctrl] and [Alt] key,
Del
and then press the [Del] key. Under Windows 98,
Windows 2000, Windows Me and Windows NT the Task
Manager appears first. Then you must press all three keys
again to re-boot.
Keyboard
A26361-K547-Z400-1-7419
Advertisement
Table of Contents
