Connecting The Device To The Mains Voltage - Fujitsu ESPRIMO P Operating Manual

Connecting the device to the mains voltage

On devices without a voltage selector switch, the voltage supply is automatically adjusted
i
to the mains voltage.
On devices with a voltage selector switch (sliding switch, plug-in element) you will need to
manually select the correct voltage rating.
1 = Sliding voltage switchover switch
2 = Plug-in voltage switchover element
a = Notch for inserting the screwdriver
► Check the voltage setting.
The visible value must agree with the local mains voltage:
!
● 115 = 100 V to 125 V
● 230 = 200 V to 240 V
► If the incorrect mains voltage is selected, push the slide switch all the way into the other
available position (1) with a pointed object.
or
► Position a screwdriver at the notch and prise out the plug-in element, turn it and refit it the other
way around (2).
A26361-K1007-Z230-1-7619, edition 1
1
100 V - 127 V
2
100 V - 127 V
a
Preparing for use
200 V - 240 V
200 V - 240 V
a
11