Fujitsu Siemens CELSIUS 4 Series Operating Manual page 58

System expansions
Installing and removing the SmartCard reader
3
Installing the carrier
Ê
Place the carrier on the guide clips in the casing.
Ê
Slide the carrier in the direction of the arrow as far as it will go (1).
Ê
Fasten the carrier into place with the screw (2).
Ê
Close the workstation (see "Closing the Workstation").
50 - English
1
2
2
1
Installing and removing SmartCard reader
Ê
Undo the screw (1).
Ê
Pull the SmartCard reader out of the
carrier (2).
Ê
Push the SmartCard reader into the
guide (a) with the component side facing
upwards (1).
Ê
Secure the SmartCard reader with the
screw (2).
Ê
Attach the cable to the SmartCard
reader (3) and to the connector for the
a
SmartCard reader on the system board
(see the Technical Manual for the
system board).
1
2
A26361-K547-Z400-1-7419