146 Errors - Lexmark MS517dn Service Manual

146 errors

146 error messages
Error code Description
146.00 Autocompensator Pick/Lift Motor—Encoder
Never Detected in tray 1.
Tray 1 pick/lift motor gearbox service check
Action
Step 1
a
Remove Tray 1.
b
Check the lift plate and gears for proper operation by moving
the metal plate.
Do the lift plate and gears move freely, and are they free of wear
or damage?
Step 2
Check the pick/lift motor gearbox for the following:
•
Gear tooth breakage
•
Freedom of rotation
Is it free of wear or damage?
Step 3
Check the cable JLIFT1 on the controller board.
Is it properly connected and free of damage?
Step 4
Replace the controller board.
Does this fix the problem?
155 errors
155 error messages
Error code Description
155.00 No encoder received from auger motor.
Action
Go to
check" on page
Action
Go to
page
Diagnostics and troubleshooting
144
"Tray 1 pick/lift motor gearbox service
144.
Yes No
Go to step 2. Replace the tray
insert.
Go to step 3. Replace the pick/lift
motor gearbox. See
"Pick/Lift motor
gearbox removal"
on page
Go to step 4. Replace the pick/lift
motor gearbox. See
"Pick/Lift motor
gearbox removal"
on page
The problem is Contact the next
solved. level of support.
"Cartridge gearbox service check" on
145.
4514-6xx
305.
305.