Table of Contents
Advertisement
ACM service check
Action
Step 1
Check the pick/lift motor gearbox for proper operation.
a
POR into the Diagnostics menu and perform a feed test:
Diagnostics Menu > Input Tray Tests > Feed Test > Tray 1
b
Check if the pick/lift motor gearbox rotates on each pick.
Does it rotate during the feed test?
Step 2
Lower the ACM assembly, and rotate the pick roller toward the front
without touching the pick tire.
Does it rotate properly?
Procedure before starting the 9yy service checks
You will need to retrieve certain information. This information will aid your next level of support in diagnosing
the problem before replacing the controller board.
Warning—Potential Damage: Do not replace the controller board unless directed by your next level of
support.
1
Collect the history information and firmware logs (Fwdebug and logs.tar.gz) from the SE menu.
2
Collect the settings from the menu settings page.
3
Collect information from the user.
Note: Not all of the items are retrievable from the printer you are working on.
A. Collecting the history information from the SE menu
Note: Make sure that your printer is connected to a network or to a print server.
Open a Web browser, type http://printer_IP_address/se, and then press Enter.
1
Notes:
printer_IP_address is the TCP/IP address of the printer
•
•
se is required to access the printer diagnostic information
2
Click History Information, copy all information, and then save it as a text file.
3
E-mail the text file to your next level of support.
B. Collecting the firmware logs (Fwdebug and logs.tar.gz) from the SE menu
Notes:
•
Make sure that your printer is connected to a network or to a print server.
Diagnostics and troubleshooting
147
Yes
No
Go to step 2.
Replace the pick/lift
motor gearbox. See
"Pick/Lift motor
gearbox removal"
on page
Replace the
Replace the ACM
controller board. See
assembly. See
"Controller board
assembly removal"
removals" on
on page
page
247.
4514-6xx
305.
"ACM
303.
Advertisement
Table of Contents
