Require Standby; A5 Loading; Ui Automation - Lexmark MS517dn Service Manual

Require Standby

Note: This setting is available only on the MS610de model.
This sets Standby Mode to On or Off. The default is On.
To change the setting:
1
From the Configuration menu, navigate to Require Standby.
2
Select On or Off to change the setting.
3
Depending on the printer model, press OK or touch
Configuration menu without saving any changes.
If Standby mode is On, the printer begins functioning in Standby mode when it remains idle for an amount of
time.
The Standby mode enables the printer:
•
To consume less energy than when operating in normal mode but not as little as when operating in Power
saver.
•
To return to the Ready state more quickly than when operating in power saver. If set to Off, this setting
disables Standby mode in the General settings menu.

A5 Loading

This determines the orientation used when printing on A5 paper.
Available options:
•
Long Edge—The printer will print A5-size paper in the long-edge feed orientation from all trays.
•
Short Edge—The printer will print A5-size paper in the short-edge feed orientation from all trays.

UI Automation

Once enabled, this setting creates an ENABLE_UI_AUTOMATION file in the /var/fs/shared/ directory. As long
as this file exists, the printer permits external developers to test the stability of their applications against the
printer to make sure that their applications have an appropriate level of stability. Disabling this setting deletes
the file and prohibits automated testing.
To change the setting:
1
From the Configuration menu, navigate to UI Automation.
2
Select from the available options to change the setting.
•
Enable
•
Disable (default)
3
Depending on the printer model, press OK or touch
Configuration menu without saving any changes.
to save the setting, or press X to return to the
to save the setting, or press X to return to the
Service menus
196
4514-6xx