Camille Bauer PQ3K Operating Instructions Manual page 47

 Meters | Meter logger: Selection of the reading interval
 Limit values: Selection of up to 12 quantities to monitor,
 Digital inputs: Debounce time (minimum pulse width), pulse rate and polarity of the
 Fault current: Configuration of the fault current channels, especially alarm and pre-warning limits,
transformer ratios as well as response and dropout delay
 Temperature: Configuration of the temperature monitoring channels, especially event text, alarm
limits, response and dropout delay, lead resistance
 Monitoring functions: Definition of up to 8
times for ON / OFF and description text
 Summary alarm: Selection of the monitoring functions to be used for triggering the
and selection of a possible source for resetting
 Operating hours: Selection of the running condition for up to 3 operating hour counters
 Digital outputs | Digital output: State, pulse or remote controlled
width, polarity, number of pulses per unit
 Digital outputs | Relay: State or remote-controlled relay output with source
 Analog outputs: Type of output, source, transfer characteristic, upper/lower range limit
 Security system: Definition of password and password protection active/inactive
 Demo mode: Activation of a presentation mode; measurement data will be simulated. Demo mode
is automatically stopped when rebooting the device.
 Device tag: Input of a free text for describing the device
P10 Rev A Device handbook LINAX PQ3000-PQ5000
limit values
monitoring functions with up to three inputs each, delay
for ON/OFF
digital inputs
summary alarm
digital output with source, pulse
47/102