Alinx AX7021 User Manual page 5

l
This ZYNQ7000 FPGA development platform adopts the core board +
carrier board mode, which is convenient for users to use the core board for
secondary development. The core board uses XILINX's Zynq7000 SOC chip
solution, which combines dual-core ARM Cortex-A9 and FPGA programmable
logic on a single chip using ARM+FPGA SOC technology. In addition, the core
board contains 2 pieces of 1GB high-speed DDR3 SDRAM chip, 1 piece 32GB
eMMC memory chip and 1 piece 256Mb QSPI FLASH chip.
In the design of the carrier board, the user has extended a wealth of
peripheral interfaces, such as 5-port Gigabit Ethernet interfaces, 4-port USB2.0
HOST interfaces, 1-port HDMI output interface, Uart serial port communication
interface, SD card holder, 40-pin carrier header, etc. It meets the requirements
of users for various Ethernet high-speed data exchange, data storage, video
transmission processing and industrial control. It is a "professional" ZYNQ
development platform. For high-speed Ethernet data transmission and
exchange, the pre-validation and post-application of data processing is possible.
This product is very suitable for students, engineers and other groups engaged
in ZYNQ development.
5 / 54
ZYNQ FPGA Development Board AX7021 User Manual
Amazon Store: https://www.amazon.com/alinx