Access Level; Activating The Screen - Honeywell TR80 Installation And Operating Manual

•
•

2.2 Access Level

To prevent unauthorized or accidental changes to the sytem, the device has a
"locked" status. Typical use-case is public areas where it is not desired for any
passerby to change setpoint or control lights.
The device enters locked mode
•
Different installations may require different scenarios for locking or unlocking the
device. Therefore, the device can operate in 4 different access level:
•
•
•
•

2.3 Activating The Screen

The device enters the sleep mode, if no action is taken in a defined time span. In
this mode screen appears to be black-out. Tap any key on the keypad, to activate
the screen.
18
Cleaning Mode
Long press and
activation of functions while wiping the glass front.
Dark Mode
Depending on configuration this mode can be activated by the power key and/
or on timeout. In this mode everything is off (dark) on the device.
on a timeout (no buttons tapped for a while)
Default access level : Sleep << >> Ready << >> Setting
Simple access level : Sleep << >> Protected <<- key combination ->> Ready << >>
Setting
Secure access level : Sleep << >> Protected <<- enter passkey ->> Ready << >>
Setting
No Access Level : Sleep << >> Protected.
to enter in cleaning mode. This mode prevents accidental
TR80 - Installation and Operation Guide