Honeywell TR80 Installation And Operating Manual page 22

•
•
TR80 - Installation and Operation Guide
TR80 Modbus Slave to Room controller and DALI64 on Sylk bus connected
to Room Controller
• In this example TR80 act as Modbus slave to controller and DALI 64 is
connected to Sylk port of the controller.
User light commands are polled from TR80 by controller and Transmitted to
DALI64 over sylk bus for execution. The light status/level is polled from DALI
64 by the controlled and updated to TR80 resisters with current status.
The Shutter User commands(level and/or Angle) are polled from TR80 by
controller and executed via digital outputs.
TR80 Modbus Slave to Room controller and conventional lighting on
controller inputs/outputs.
• In this example TR80 acts as Modbus slave to controller.
Light and Switches are connected to conventional digital and analogue
Inputs/outputs of the controller.
15