Access Level; Activating The Screen - Honeywell TR80UWD Installation And Operating Manual

•
•

2.2 Access Level

To prevent unauthorized or accidental changes to the sytem, the device has a
"locked" state. Typical use-case is public areas where it is not desired for any pass-
erby to change setpoint or control lights.
The device enters locked state on a timeout (no buttons tapped for a while).
Different installations may require different scenarios for locking or unlocking the
device. Therefore, the device can be configured to operate in 4 different access lev-
els. The allowed states and their sequence for each configuration are as follows:
•
•
•
•

2.3 Activating The Screen

The device may switch to sleep or dark state, if no action is taken in a defined time
span. In this state screen appears to be black-out. Tap any key on the keypad to
activate the screen.
20
Cleaning
Long press and
activation of functions while wiping the glass front.
Dark
Depending on configuration this state can be activated by the power key and/or
on timeout. In this state everything is off (dark) on the device.
Default access level : Sleep << >>Operational
Simple access level : Sleep << >> Display Only <<- key combination -
>>Operational
Secure access level : Sleep << >> Display Only <<- enter passkey ->>Operational
No Access Level : Sleep << >> Display Only
to enter in cleaning mode. This mode prevents accidental
TR80 - Installation and Operation Guide