Tv-Out - Kontron KTGM45/mITX User Manual

KTD-N0793-L

3.4.3 TV-Out

The KTGM45 boards include layout for TV-Out connector, but TV-out connector is not mounted from the
board PN revision xxxxxx03. Anyway the TV-out has support for (Analogue) Component Video (S-Video,
YPbPr or RGB) and Composite Video Output (NTSC/ PAL output format).
Pull
Note Ioh/Iol Type
U/D
/75Ω
-
- - PWR
- -
Pin Signal Description
3 TVDACB TVDAC Channel B output supports:
Component Video - S-Video: Luminance analogue signal
Component Video - YPbPr: Luminance (Y) analogue signal
Component Video - RGB: Green analogue signal
(Composite Video: Not used)
4 TVDACC TVDAC Channel C output supports:
Component Video - S-Video: Chrominance analogue signal
Component Video - YPbPr: Chrominance (Pr) analogue signal
Component Video - RGB: Red analogue signal
(Composite Video: Not used)
5 TVDACA TVDAC Channel A output supports:
(Component Video - S-Video: Not used)
Component Video - YPbPr: Chrominance (Pb) analogue signal
Component Video - RGB: Blue analogue signal
Composite Video: CVBS signal
Page 31
Signal PIN
AO TVDACC 4
GND 2 6
- NC
Signal
GND
7 3 TVDACB
5 1 GND
TVDACA
KTGM45 Users Guide
Connector
Connector
Pull
Type Ioh/Iol Note
U/D
PWR - -
/75Ω
AO -
PWR - -
/75Ω
AO -