Maintenance And Wifi Bluetooth Led Indicator - Life Fitness Integrity SL Service Manual

Maintenance and WiFi Bluetooth LED Indicator

In the manager configuration option several mileage parameters can be set.
1. Press the SPEED UP / DOWN arrow keys (Treadmill) or LEVEL UP / DOWN arrow keys (Non Treadmill) in the
following sequence: UP, DOWN, UP, DOWN.
2. Press STOP.
3. Navigate through the Manager's Configuration Options using any ARROW key to access Maintenance.
4. Press ENTER.
5. Press any ARROW key to toggle between selection options.
Item
Maintenance
NOTE: Belt Mileage and Product Time parameters are to compliment the Preventative Maintenance Schedule and
Recommendations by inspection of the product, and not to guarantee warranty responsibility related to
replacement of parts.
6. Press ENTER to make your selection or BACK / STOP to exit.
The WiFi Bluetooth LED indicator is located above the Bluetooth icon in the center of the console.
Bluetooth LED is also ON when a Bluetooth connection is made.
Maintenance: Bluetooth LED is OFF in a normal state. If one of these Mileage or Product Time thresholds is
set and reached, the Bluetooth LED will constantly be ON in the Attract screen.
Wireless connectivity: Bluetooth LED to blink once every 3 seconds if wireless connectivity is disconnected. Since
the console wireless connectivity will be enabled by default, the LED will remain off if the user
intentionally disables wireless connectivity under managers configuration.
Option Description
0 - Belt Mileage Manually set mileage parameter to trigger maintenance indicator
(Treadmill only)
1 - Belt Reset Resets Belt Mileage after replacement
(Treadmill only)
2 - Product Time Manually set product hours to trigger maintenance indicator
Page 10 of 153