Maintenance Procedures; Maintenance Schedule - Life Fitness Axiom Series Owner's Manual

5. Maintenance Procedures

Maintenance Schedule

ACTION
CLEAN
Guide Rods
Shrouds
Hand Grips
WAX
Frames
INSPECT
Accessories
Paint
Cable
Hardware
Frame
Hand Grips
Shrouds
LUBRICATE
Guide Rods
Clean
• Guide rods with a cotton cloth.
• Hand grips with an approved or compatible cleaner.
Wax
• Frames with a standard, non-abrasive, wax finish.
Inspect
• Cables. Look for wear or damage and proper tension. Pay close attention at bends and attachment points.
• Hardware. Check for loosening. Tighten as required.
• Frames. Inspect for wear and damage.
• Hand grips. Check for wear and damage.
• For paint chips. Fill in immediately with manufacturers touch-up paint.
• Jam nut at top of weight stack for tightness.
Lubricate
• Lubricate guide rods with Break-Free® brand lubricant (part number SK50-P0005-0000). Apply the lubricant to a
cotton cloth, and then run the cotton cloth up and down the guide rods as needed.
NOTE: Only a few drops of lubricant are required for each guide rod.
Once a Day
• Visually inspect cables for wear at and around connections and along the entire length of the cable. Always replace
at first sign of wear.
Once a Week
• Visually inspect all hardware for loosening, tampering or wear.
• Check jam nut at top of weight stack for tightness.
DAILY WEEKLY
X
X
Page 31 of 41
MONTHLY
X
X
X
X
X
X
X
AS NEEDED
X
X
X