Software; Software Update; Settings - Life Fitness Integrity SL Service Manual

7. Software

Software Update

Tools Required: USB stick
Time: 15 minutes
1. Place update file on root directory of USB drive __________.lfupd.
2. Insert USB stick into USB port in front panel.
3. Software update will auto start and display STARTING SOFTWARE UPDATE. The update will take 5-10 minutes.
4. When update is complete console will reboot. Remove USB stick.
Successful update Console reboots and returns to home screen.
Unsuccessful update
Console will display Update Failed and reboot after 30 seconds. Check software on USB
stick and retry update procedure.

Settings

1. Press the button at the SELECT WORKOUT screen. Upon entering the settings menu, the screen will display
SETTINGS MENU.
2. Press left or right on the navigation button to scroll through the settings options.
3. Press up or down on the navigation button to adjust the settings.
4. Press the ENTER button or press left or right on the navigation button to save modifications and move to the next
option.
5. Press the RESET button to exit the settings menu.
The settings and selection options are listed below.
UNITS
Selection options are English and Metric.
BEEPS Selection options are On and Off.
TIME This option is for your workout times. Selection options are up and down.
METS = OFF Selection options are On and Off.
PACE = OFF (only Selection options are On and Off.
treadmills)
RPM = OFF (only Selection options are On and Off.
bikes and cross-
trainers)
CONTRAST = XX Selection options are: 1-99.
BRIGHTNESS = X Selection options are 1-10.
WIRELESS HR = ON Turns the telemetry heart receiver on and off . Selection options are On and Off.
SAFETY MODE
Selection options are On and Off.
(treadmill)
Statistics
Press the
product was used in a workout, or choose TOTAL MILES for the number of miles that the
product was used in a workout.
Safety Mode = ON Selection options are On and Off.
button to select. Choose TOTAL HOURS for the total number of hours that the
Page 67 of 153