Table of Contents
Advertisement
5-2 Auto Datalogger ( Set sampling time
a. Start the datalogger
Press the " LoggerButton ( 3-8, Fig. 1 ) > 2 Sec. , the LCD will
show the text " LOGGER ", and flashing , at the same time
the measuring data along the time information will be
saved into the memory circuit.
Remark :
How to set the sampling time, refer to Chapter 7-4,
*
page 22.
How to set the beeper sound is enable, refer to
*
Chapter 7-3, page 22.
b. Pause the datalogger
During execute the Datalogger function , if press the
" Logger Button " ( 3-8, Fig. 1 ) once will pause the
Datalogger function ( stop to save the measuring data
into the memory circuit temporally ). In the same time
the text of " LOGGER " will stop flashing.
Remark :
If press the " Logger Button " ( 3-8, Fig. 1 ) once again
will execute the Datalogger again, the text of " LOGGER " will
flashing .
c. Finish the Datalogger
During pause the Datalogger, press the " Logger Button " (
3-8, Fig. 1) continuously at least two seconds, the " Logger "
indication will be disappeared and finish the Datalogger.
≧
1 second )
16
Advertisement
Table of Contents
