Auto Datalogger ( Set Sampling Time ≧ 1 Second ) - Lutron Electronics CO2-9914SD Operation Manual

6-2 Auto Datalogger ( Set sampling time
a. Start the datalogger
Press the " Logger Button ( 3-8, Fig. 1 ) >2 second , the LCD will
show the text " Scan card ", then press the " Logger Button "
( 3-8, Fig. 1 ), the LCD will show text " DATA LOGGER " will
flashing, at the same time the measuring data along the
time information will be saved into the memory circuit.
Remark :
How to set the sampling time, refer to Chapter 8-3 .
*
How to set the beeper sound is enable, refer to
*
Chapter 8-5 .
b. Pause the datalogger
During execute the Datalogger function , if press the
" Logger Button " ( 3-8, Fig. 1 ) once will pause the
Datalogger function ( stop to save the measuring data
into the memory circuit temporally ). In the same time
the text of " DATALOGGER " will be no flashing.
Remark :
If press the " Logger Button " ( 3-8, Fig. 1 ) once again
will execute the Datalogger again, the bottom text of "
DATA LOGGER " will flashing .
c. Finish the Datalogger
During pause the Datalogger, press the "Logger Button Button "
( 3-8, Fig. 1) continuously at least two seconds, the " DATA LOGGER "
indication will be disappeared and finish the Datalogger.
All manuals and user guides at all-guides.com
≧
12
1 second )