Summary of Contents for Lutron Electronics EM-1910
Page 1
Sound level, 7 in 1 ENVIRONMENT METER Model : EM-1910 Your purchase of this ENVIRONMENT METER. 7 in 1 . marks a step forward for you into the field of precision measurement. Although this Meter is a complex and delicate...
1. FEATURES * 7 in 1 professional environment instruments: 1. Sound level meter., 2. Humidity/Temp., 3. Light meter 4. Dew point, 5. Wet bulb, 6. Heat index, 7. Type K Temp.(optional probe) * Tiny bone shape with light weight and small size case design are suitable for handling with one hand.
2. SPECIFICATIONS 2-1 General Specifications Display 14 mm LCD display Measurement 1. Sound level meter. 2. Humidity/Temp. 3. Dew point 4. Wet bulb 5. Heat index 6. Light meter 7. Type k Temp.( optional ) Operating Max. 80% RH. Humidity Operating 0 to 50 ℃...
Page 5
2-2 Electrical Specification ( 23 ±5℃ ) Sound level meter. Measurement 35 - 130 dB. Range Resolution 0.1 dB. Function Data hold Record ( Max., Min. ). Accuracy Characteristics of "A" frequency weighting network (23 ±5 ℃) meet IEC 61672-2013 class 2 Under 94 dB input signal, the accuracy are : 31.5 ±3.0 dB...
Page 6
Humidity/Temp. Unit Range Resolution Accuracy % RH 10 to 95 %RH 0.1 %RH < 70% RH : ±4 %RH 70% RH : ≧ ±( 4 %rdg +1.2 %RH) Temp. 0 to 50 ℃ 0.1 ℃ ±1.2 ℃ 32 to 122 ℉ 0.1 ℉...
Page 7
Heat index Unit Range Resolution Accuracy ℃ 0 to 100.0 ℃ 0.1 ℃ ±2.0 ℃ ℉ 32 to 212 ℉ 0.1 ℉ ±3.6 ℉ Pleas refer to http://en.wikipedia.org/wiki/Heat_index Type K/J thermometer Sensor Resolution Range Accuracy Type Type K 0.1 ℃ -50.0 to 1300.0 ℃...
4. MEASURING PROCEDURE 4-1 Power on/off Button = Power Button 1) Power on : Press " Power Button " once. 2) Power off : During power on, press " Power Button " > 3 seconds. will power off. 4-2 LCD backlight on/off During power on, press "...
During power on, press the " Hold button " continuously ( not release the button ), the Display will show the following text in sequence : Display Function text Sound level meter Humidity/Temp. Dew point Wet bulb Temp. Heat index HEAt LigHt Light meter...
The selection unit for all function are : Measurement Unit Sound level meter Humidity Temp. ( Humidity ) ℃, ℉ Dew point ℃, ℉ Wet bulb Temp. ℃, ℉ Heat index ℃, ℉ Light meter * auto range Lux, Ft-cd Type K Temp.
4-6 Special attention for the Humidity measurement Attention : Intend to get the precision reading, for the Humidity / Temp. , Dew point Temp., Wet bulb Temp., Heat index measurement, the hand or fingers do not touch ( or stay away ) the Humidity sensor ( 3-8, Fig.
4- 8 Hold Function Whenever press the " Hold Button " will freeze the current reading value with a "HOLD" symbol on the display. To release the Hold function, just press the " Hold button " once again, the " HOLD " indicator will be disappeared. * During execute the "...
4-11 Type k Temp. measurement 1) Insert the plug of the optional Type K Temp. probe, TP-01 into the " Type K probe socket " ( 3-12, Fig. 1 ). 2) Power on the meter, select the function to " Type K Temp.
Page 15
The 16 digits data stream will be displayed in the following format : D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 Each digit indicates the following status : End Word D1 & D8 Display reading, D1 = LSD, D8 = MSD For example : If the display reading is 1234, then D8 to...
6. BATTERY REPLACEMENT 1) When the LCD display shows " " symbol, it is necessary to replace the battery. However measurement may still be made for several hours after the low battery indicator appears. 2) Open the " Battery Compartment / Cover " ( 3-10, Fig. 1 ) and remove the battery.