Sd Memory Card Format; Select The Air Flow To Cmm Or Cfm - Lutron Electronics EMC-9400SD Operation Manual

7-8 SD memory card Format

When the lower display show " SD FORMAT "
1) Use the " ▲ Button " ( 3-5, Fig. 1 ) or " ▼ Button " (
3-6, Fig. 1 ) to select the display text to " YES " or " NO ".
YES - Intend to format the SD memory card
NO - Not execute the SD memory card format
2) If select the upper to " yES ", press the " Enter Button
" ( 3-8, Fig. 1 ) once again, the Display will show text
" SURE " to confirm again, if make sure to do the
SD memory card format, then press " Enter Button "
once will format the SD memory clear all the existing
data that already saving into the SD card.
7-9 Air Flow SELECT
When the lower display show " Air Flow SELECT "
1) Use the " ▲ Button " ( 3-5, Fig. 1 ) or " ▼ Button "
( 3-6, Fig. 1 ) to select the display text to " CMM " or " CFM ".
CMM - Air flow mrasurement unit is Metric unit and default.
CFM - Air flow mrasurement unit is Imperial unit and default.
2) After select the upper text to " CMM " or " CFM ",
press the " Enter Button " ( 3-8, Fig. 1 ) will save the
setting function with default and Back to " Advanced Setting screen ".
24