Read, understand and follow all safety rules and
operating instructions before attempting to operate
the machine.
2.1 Preparation for Use
STAND CLEAR when cutting the metal
banding to avoid being cut when the
banding snaps back.
1. Remove the metal banding from the machine.
2. Lift the front of the machine and remove banding
and blocks from front wheels.
3. Lower machine.
4. Connect the negative battery lead terminal (Figure 2-
1).
X-Series Work Platform
Machine Preparation
2.2 Preparation For Shipment
1. Fully lower the platform.
2. Disconnect the battery negative (-) lead from the
battery terminal (Figure 2-1).
3. Band the Platform Assembly to the Chassis.
Figure 2-1: Battery Module
Section
2.1
Negative Battery Terminal
2-1